See typical equipment for billet preparation, extrusion, machining, section inspection and packing, along with concept views of the office and showroom.
Aluminum extrusion equipment
A typical line separates forming, straightness control and final inspection into distinct stages, from billet preparation through packing.
Billet and die preparation
Billet rack and feeder
The feeder transfers aluminum stock to the heating station.
Billet furnace and shear or saw
The equipment heats and cuts the stock to the required billet length.
Die preheating oven and racks
The equipment preheats and organizes extrusion dies.
Die storage and lifting equipment
Racks organize dies, while lifting equipment assists transfers.
Extrusion and in-line cooling
Hydraulic extrusion press and die
The press pushes the billet through the die to form the profile.
Runout table and quench
The table receives the profile, and the quench uses air, water or both as required.
Puller and in-line cut-off
The puller guides the profile, and the cut-off divides it into handling lengths.
In-line infrared pyrometer
The pyrometer can monitor profile temperature at the press or quench exit.
Straightening, cutting and aging
Cooling bed and transfer system
The bed receives the profiles, and the transfer system moves them to the next station.
Stretcher and finish saw
The stretcher corrects straightness, and the saw cuts profiles to length.
Aging oven and loading baskets
The baskets hold the profiles for heat treatment according to the alloy and process.
Profile fabrication
CNC profile machining center
The center mills slots, drills holes or taps threads to drawing requirements.
Punch press and dedicated tooling
The press adds holes or openings as required.
Deburring equipment
Brushes or abrasive tools remove burrs from cut or machined edges.
Cross-section measurement and inspection
Optical profile measurement system
The system scans a sample cross-section for comparison with the drawing.
Calipers and wall-thickness gauges
Inspectors verify key dimensions and wall thickness.
Inspection and packing
Inspection bench and gauges
Inspectors check key section dimensions and appearance against the drawing.
Packing bench and strapping equipment
The packing station protects, bundles and labels the finished profiles.
The images are illustrations. The equipment list shows typical industry configurations, which vary by product and process.
The sample area highlights LED aluminum profiles, PC diffusers and magnetic tracks. Importers and distributors can compare mounting options and discuss models, cross-sections and purchase requirements with the sales team.
Reception and showroom · Concept illustration
Meeting room · drawing and sample review · Concept illustration
Showroom · profiles and magnetic tracks · Concept illustrationWhatsApp
